How to Repair a Water-Damaged Ceiling (2024)

1

How to Find Leaks

If your client has ceiling water damage, the first priority is to find and eliminate the source of the leak before it can cause further harm. An overflowing sink or broken water line might cause obvious leaks, but others can be more challenging to find.

Know that poorly ventilated kitchens, bathrooms or laundry rooms can cause water droplets to form on ceilings that sometimes resemble leaks. Installing exhaust fans or running dehumidifiers can reduce ceiling condensation.

When a ceiling has an active leak, place a bucket or tarp under it to contain the water. Clear the area of furniture or other valuables.

Water can pool in light fixtures, which are often the lowest points on the ceiling. Shut off power at the breaker box, and take other safety precautions if the leak involves electrical wiring. Do not dry wet wiring by hand. Use a hair dryer or similar tool.

Consider making a small hole at the center of the ceiling leak with a screwdriver or drill to control the leak’s direction.

If the ceiling has a wide stain or drip area, use a pencil or piece of chalk to draw an outline of it, which can indicate the location of the leak. If the outline is round, the source of leaking water likely originates at the center. If the outline is more cone-shaped, the source is likely at the narrow end of the outline and is fanning outwards.

If you have trouble isolating the source of the leak, use a moisture meter. Place the meter against a flat surface and take readings. The area with highest moisture levels is the most likely location of the leak.

Inspect the floor, attic or roof above the ceiling leak. Common sources of ceiling leaks include:

• Overflowing sinks, toilets, bathtubs or showers
• Appliances with faulty water supply or drain lines
• Leaky pipes
• Clogged gutters, which can overflow and drain into the house interior
• Damaged, raised or missing shingles

Another strategy for finding leaks is to place tissue paper on pipes or ceiling joists in the area. The paper will absorb any moisture and indicate the presence of leaks.

As a last resort, use a drywall saw to cut small holes in the ceiling until you uncover the leak. Make sure to explain to the client the need for this and get the proper permission.

If the roof is leaking, look for broken or missing shingles. Inspect the sides of the chimney and any pipes or vents on the roof for signs of water entry.

If you believe there are broken shingles, but you can’t find the leak during dry weather, simulate rainfall by having another person spray the roof with a hose from a ladder. Then check the attic for leaks.

Pro Tip: Wiring submerged for more than 24 hours or in water more than a foot deep will likely need to be replaced.

2

How to Fix Leaks

If you’re lucky, the leak at the client’s home will be an easy fix. Take the following steps to fix leaks.

Before replacing pipes or plumbing fittings, shut off the water supply to the area. Wear work gloves and safety glasses.

Plumbing leaks can include worn caulk, rust or wear of pipes or pipe fittings. Pipes can also burst following changes in temperature. Tighten or replace any faulty pipes or pipe fittings.

Common leaks in bathrooms or kitchens include:

• Broken toilet bowls or closet flanges
• Faulty shower doors
• Failing caulk around bathtub or showers
• Faulty water supply lines for sinks or appliances
• Damaged P-trap drains

Water can also gather in sagging gutters. Reattach or replace gutters to ensure that water flows to the nearest downspout.

Remove and replace shingles that are damaged, raised or missing.

3

How to Repair a Water-Damaged Ceiling

The method of repairing water damage on a ceiling depends on the type and extent of the damage. Repairing water damage that requires extensive drywall replacement will probably need two people.

Types of ceiling water damage include:

• Brown or yellow water spots
• Cracked, peeling or bubbled paint
• Sagging plaster or drywall

Make sure the area is completely dry, including between drywall and insulation, to prevent mold or mildew. After extensive leaks, you may need to rent high-powered blower fans or dehumidifiers to make sure all moisture is removed from porous material. Moisture meters can confirm that the areas are dry.

Ceilings that have minor discolorations may only need to be repainted, as long as all moisture, mold and mildew has been removed.

If the leak has left only a small hole, fill it with joint compound and paint over it.

For larger areas of water damage, follow these steps:

• Remove all damaged materials such as insulation or drywall with a drywall saw.
• Cut back the drywall to the closest joists for attaching the replacement sheet. You may need to attach 2- x 4-inch boards along the joists to provide a surface for the drywall screws.
• Cut a sheet of drywall to fit the gap, making sure it matches the thickness of the ceiling drywall.
• With assistance, lift the drywall into place.
• Use a drill and drywall screws to attach the drywall onto the ceiling.
• Prime and paint the ceiling.

Repairing water damage on ceilings can cost between $45-$55 per square foot, not including repairs to the initial leak. The age of the house, the ceiling material and the size of the damaged area may lead to higher repair costs.

Pro Tip: When repairing a damaged ceiling, consider taking the opportunity to upgrade ceiling fixtures or repaint the room.

4

More Tools. More Products. More Perks.